VT-MOD-I-200-D-NFC
Art. no. 105250
Volume flow temperature transmitter with display and NFC interface, Modbus output, L = 200 mm
""For measuring volume flow in air ducts. With
adjustable mounting flange for adjusting the
immersion depth. Via the NFC interface on the
display, the transmitter can be configured in
such a way that the flow volume speed as m/s is
displayed and output instead of the flow volume
in m³/h. The size of the air duct and a
correction factor can also be set via NFC
interface. The microprocessor technology
guarantees a constant linear output, even at low
air speeds. 5-point calibration and
parameterization (address, baud rate) via the NFC
interface on the display. 10 offset points:
linear shift of characteristic curve of the
output signal via 10-level rotary switch. Captive
lid with 8-way positioning. Volume flow
measurement range: 0 – 9,999 m³/h,
parameterizable via correction factors 10,
measurement ranges can be set using the rotary
switch. Air flow: 0 – 2 m/s 0 – 2,5 m/s 0 – 4 m/s
0 – 5 m/s 0 – 6 m/s 0 – 8 m/s 0 – 10 m/s* 0 – 12
m/s 0 – 15 m/s 0 – 20 m/s *Factory setting
Measuring range, temperature: Factory setting 0 –
50 °C, via NFC interface adjustable between -50
and 100 °C
""For measuring volume flow in air ducts. With
adjustable mounting flange for adjusting the
immersion depth. Via the NFC interface on the
display, the transmitter can be configured in
such a way that the flow volume speed as m/s is
displayed and output instead of the flow volume
in m³/h. The size of the air duct and a
correction factor can also be set via NFC
interface. The microprocessor technology
guarantees a constant linear output, even at low
air speeds. 5-point calibration and
parameterization (address, baud rate) via the NFC
interface on the display. 10 offset points:
linear shift of characteristic curve of the
output signal via 10-level rotary switch. Captive
lid with 8-way positioning. Volume flow
measurement range: 0 – 9,999 m³/h,
parameterizable via correction factors 10,
measurement ranges can be set using the rotary
switch. Air flow: 0 – 2 m/s 0 – 2,5 m/s 0 – 4 m/s
0 – 5 m/s 0 – 6 m/s 0 – 8 m/s 0 – 10 m/s* 0 – 12
m/s 0 – 15 m/s 0 – 20 m/s *Factory setting
Measuring range, temperature: Factory setting 0 –
50 °C, via NFC interface adjustable between -50
and 100 °C
Unit price
€348.10
Volume flow temperature transmitter with display and NFC interface, Modbus output, L = 200 mm
""For measuring volume flow in air ducts. With
adjustable mounting flange for adjusting the
immersion depth. Via the NFC interface on the
display, the transmitter can be configured in
such a way that the flow volume speed as m/s is
displayed and output instead of the flow volume
in m³/h. The size of the air duct and a
correction factor can also be set via NFC
interface. The microprocessor technology
guarantees a constant linear output, even at low
air speeds. 5-point calibration and
parameterization (address, baud rate) via the NFC
interface on the display. 10 offset points:
linear shift of characteristic curve of the
output signal via 10-level rotary switch. Captive
lid with 8-way positioning. Volume flow
measurement range: 0 – 9,999 m³/h,
parameterizable via correction factors 10,
measurement ranges can be set using the rotary
switch. Air flow: 0 – 2 m/s 0 – 2,5 m/s 0 – 4 m/s
0 – 5 m/s 0 – 6 m/s 0 – 8 m/s 0 – 10 m/s* 0 – 12
m/s 0 – 15 m/s 0 – 20 m/s *Factory setting
Measuring range, temperature: Factory setting 0 –
50 °C, via NFC interface adjustable between -50
and 100 °C
""For measuring volume flow in air ducts. With
adjustable mounting flange for adjusting the
immersion depth. Via the NFC interface on the
display, the transmitter can be configured in
such a way that the flow volume speed as m/s is
displayed and output instead of the flow volume
in m³/h. The size of the air duct and a
correction factor can also be set via NFC
interface. The microprocessor technology
guarantees a constant linear output, even at low
air speeds. 5-point calibration and
parameterization (address, baud rate) via the NFC
interface on the display. 10 offset points:
linear shift of characteristic curve of the
output signal via 10-level rotary switch. Captive
lid with 8-way positioning. Volume flow
measurement range: 0 – 9,999 m³/h,
parameterizable via correction factors 10,
measurement ranges can be set using the rotary
switch. Air flow: 0 – 2 m/s 0 – 2,5 m/s 0 – 4 m/s
0 – 5 m/s 0 – 6 m/s 0 – 8 m/s 0 – 10 m/s* 0 – 12
m/s 0 – 15 m/s 0 – 20 m/s *Factory setting
Measuring range, temperature: Factory setting 0 –
50 °C, via NFC interface adjustable between -50
and 100 °C
| Interface 1: |
NFC |
|---|---|
| Measured medium 1: |
Air |
| Measuring range 1: |
0...9999 m³/h |
| Measuring range 2: |
0…20 m/s |
| Measuring range 3: |
-50...+100 °C (adjustable) |
| Permissible temperature of medium 1: |
-20…+100 °C |
| Power supply 1: |
24 V AC/DC |
| Protection type: |
IP65 |
| Sensor element 1: |
Calorimetric sensor |
Datasheet 11401 - OPP-SENS® Volume flow temperature transmitter VT-...
Flyer OPP-SENS® NFC
Catalogue 2024 (PDF)
Catalogue price list 2024 (Excel)
Catalogue price list 2024 (PDF)
Flip catalogue 2024
EG-Konformität_OPP-SENS_2016-04-20 (only German)
Technical data
| Interface 1: |
NFC |
|---|---|
| Measured medium 1: |
Air |
| Measuring range 1: |
0...9999 m³/h |
| Measuring range 2: |
0…20 m/s |
| Measuring range 3: |
-50...+100 °C (adjustable) |
| Permissible temperature of medium 1: |
-20…+100 °C |
| Power supply 1: |
24 V AC/DC |
| Protection type: |
IP65 |
| Sensor element 1: |
Calorimetric sensor |
Downloads
Datasheet 11401 - OPP-SENS® Volume flow temperature transmitter VT-...
Flyer OPP-SENS® NFC
Catalogue 2024 (PDF)
Catalogue price list 2024 (Excel)
Catalogue price list 2024 (PDF)
Flip catalogue 2024
EG-Konformität_OPP-SENS_2016-04-20 (only German)
Einblicke zu 40 Jahren Oppermann
Contact us