T-KP10-I-100
Art. no. 102968
Immersion temperature sensor (passive) KP10, sensor length 100 mm
For measuring the temperature in pipes and
ventilation ducts via mounting flange or
immersion sleeve, with captive rotating lid. 8
lid positions selectable. Measuring range: -40 –
100 °C permanent, 125 °C short-term. Tolerance:
+/-0.2 °C at 25 °C. Sensor diameter 6 mm
(stainless steel). Plastic housing: dark
gray/yellow. Protection class: IP 65, (including
seal ring). Strain relief M16. Fast wiring with
spring terminals 0.2 – 1.5 mm². Permissible
ambient temperature: -25 °C to +85 °C. Leakage
resistance: => 100 MΩ, 20 °C, 500 V DC.
Data sheet no. 20900
For measuring the temperature in pipes and
ventilation ducts via mounting flange or
immersion sleeve, with captive rotating lid. 8
lid positions selectable. Measuring range: -40 –
100 °C permanent, 125 °C short-term. Tolerance:
+/-0.2 °C at 25 °C. Sensor diameter 6 mm
(stainless steel). Plastic housing: dark
gray/yellow. Protection class: IP 65, (including
seal ring). Strain relief M16. Fast wiring with
spring terminals 0.2 – 1.5 mm². Permissible
ambient temperature: -25 °C to +85 °C. Leakage
resistance: => 100 MΩ, 20 °C, 500 V DC.
Data sheet no. 20900
Unit price
€30.10
Immersion temperature sensor (passive) KP10, sensor length 100 mm
For measuring the temperature in pipes and
ventilation ducts via mounting flange or
immersion sleeve, with captive rotating lid. 8
lid positions selectable. Measuring range: -40 –
100 °C permanent, 125 °C short-term. Tolerance:
+/-0.2 °C at 25 °C. Sensor diameter 6 mm
(stainless steel). Plastic housing: dark
gray/yellow. Protection class: IP 65, (including
seal ring). Strain relief M16. Fast wiring with
spring terminals 0.2 – 1.5 mm². Permissible
ambient temperature: -25 °C to +85 °C. Leakage
resistance: => 100 MΩ, 20 °C, 500 V DC.
Data sheet no. 20900
For measuring the temperature in pipes and
ventilation ducts via mounting flange or
immersion sleeve, with captive rotating lid. 8
lid positions selectable. Measuring range: -40 –
100 °C permanent, 125 °C short-term. Tolerance:
+/-0.2 °C at 25 °C. Sensor diameter 6 mm
(stainless steel). Plastic housing: dark
gray/yellow. Protection class: IP 65, (including
seal ring). Strain relief M16. Fast wiring with
spring terminals 0.2 – 1.5 mm². Permissible
ambient temperature: -25 °C to +85 °C. Leakage
resistance: => 100 MΩ, 20 °C, 500 V DC.
Data sheet no. 20900
| Measured medium 1: |
Air |
|---|---|
| Measured medium 2: |
Fluid media |
| Permissible temperature of medium 1: |
-50…+120 °C |
| Protection type: |
IP65 |
Datasheet 20900 - OPP-SENS® Standard temperature sensor (passive) T-...
Flyer OPP-SENS® NFC
Catalogue 2024 (PDF)
Catalogue price list 2024 (Excel)
Catalogue price list 2024 (PDF)
Flip catalogue 2024
EG-Konformität_OPP-SENS_2016-04-20 (only German)
Technical data
| Measured medium 1: |
Air |
|---|---|
| Measured medium 2: |
Fluid media |
| Permissible temperature of medium 1: |
-50…+120 °C |
| Protection type: |
IP65 |
Downloads
Datasheet 20900 - OPP-SENS® Standard temperature sensor (passive) T-...
Flyer OPP-SENS® NFC
Catalogue 2024 (PDF)
Catalogue price list 2024 (Excel)
Catalogue price list 2024 (PDF)
Flip catalogue 2024
EG-Konformität_OPP-SENS_2016-04-20 (only German)
F-13
Air duct flange Bore diameter 13 mm
For attaching the base temperature sensor on the
housing (standard). For straight and round air
ducts with lip for airtight termination, 2 holes
for screwing onto the air duct. The flange is
made of dark gray plastic, including cross-head
screw for fixing the sensor.
Data sheet no. 20902
For attaching the base temperature sensor on the
housing (standard). For straight and round air
ducts with lip for airtight termination, 2 holes
for screwing onto the air duct. The flange is
made of dark gray plastic, including cross-head
screw for fixing the sensor.
Data sheet no. 20902
F-6
Air duct flange Bore diameter 6 mm, with screw
For OPP-SENS base temperature sensor. Movable
along the length of the probe For straight and
round air ducts with lip for airtight
termination, 2 holes for screwing onto the air
duct. The flange is made of dark gray plastic,
including cross-head screw for fixing the sensor.
Data sheet no. 20902
For OPP-SENS base temperature sensor. Movable
along the length of the probe For straight and
round air ducts with lip for airtight
termination, 2 holes for screwing onto the air
duct. The flange is made of dark gray plastic,
including cross-head screw for fixing the sensor.
Data sheet no. 20902
ATM-050
Brass immersion sleeve Nominal pressure: PN 16 bar.
Screw-in thread: G 1/2 A Outer Ø: 8 mm
Installation length: 50 mm
Screw-in thread: G 1/2 A Outer Ø: 8 mm
Installation length: 50 mm
AT-050
Stainless steel immersion sleeve Nominal pressure: PN 40 bar, material: 1.4571.
Screw-in thread: G 1/2 A Outer Ø: 9 mm
Installation length: 50 mm
Screw-in thread: G 1/2 A Outer Ø: 9 mm
Installation length: 50 mm
ATM-100
Brass immersion sleeve Nominal pressure: PN 16 bar.
Screw-in thread: G 1/2 A Outer Ø: 8 x 1 mm
Installation length: 100 mm
Screw-in thread: G 1/2 A Outer Ø: 8 x 1 mm
Installation length: 100 mm
AT-100
Stainless steel immersion sleeve Nominal pressure: PN 40 bar, material: 1.4571.
Screw-in thread: G 1/2 A Outer Ø: 9 mm
Installation length: 100 mm
Screw-in thread: G 1/2 A Outer Ø: 9 mm
Installation length: 100 mm
ATM-150
Brass immersion sleeve Nominal pressure: PN 16 bar.
Screw-in thread: G 1/2 A Outer Ø: 8 x 1 mm
Installation length: 150 mm
Screw-in thread: G 1/2 A Outer Ø: 8 x 1 mm
Installation length: 150 mm
AT-150
Stainless steel immersion sleeve Nominal pressure: PN 40 bar, material: 1.4571.
Screw-in thread: G 1/2 A Outer Ø: 9 mm
Installation length: 150 mm
Screw-in thread: G 1/2 A Outer Ø: 9 mm
Installation length: 150 mm
ATM-200
Brass immersion sleeve Nominal pressure: PN 16 bar.
Screw-in thread: G 1/2 A Outer Ø: 8 x 1 mm
Installation length: 200 mm
Screw-in thread: G 1/2 A Outer Ø: 8 x 1 mm
Installation length: 200 mm
AT-200
Stainless steel immersion sleeve Nominal pressure: PN 40 bar, material: 1.4571.
Screw-in thread: G 1/2 A Outer Ø: 9 mm
Installation length: 200 mm
Screw-in thread: G 1/2 A Outer Ø: 9 mm
Installation length: 200 mm
ATM-250
Brass immersion sleeve Nominal pressure: PN 16 bar.
Screw-in thread: G 1/2 A Outer Ø: 8 x 1 mm
Installation length: 250 mm
Screw-in thread: G 1/2 A Outer Ø: 8 x 1 mm
Installation length: 250 mm
AT-250
Stainless steel immersion sleeve Nominal pressure: PN 40 bar, material: 1.4571.
Screw-in thread: G 1/2 A Outer Ø: 9 mm
Installation length: 250 mm
Screw-in thread: G 1/2 A Outer Ø: 9 mm
Installation length: 250 mm
ATM-300
Brass immersion sleeve Nominal pressure: PN 16 bar.
Screw-in thread: G 1/2 A Outer Ø: 8 x 1 mm
Installation length: 300 mm
Screw-in thread: G 1/2 A Outer Ø: 8 x 1 mm
Installation length: 300 mm
AT-300
Stainless steel immersion sleeve Nominal pressure: PN 40 bar, material: 1.4571.
Screw-in thread: G 1/2 A Outer Ø: 9 mm
Installation length: 300 mm
Screw-in thread: G 1/2 A Outer Ø: 9 mm
Installation length: 300 mm
ATM-450
Brass immersion sleeve Nominal pressure: PN 16 bar.
Screw-in thread: G 1/2 A Outer Ø: 8 x 1 mm
Installation length: 450 mm
Screw-in thread: G 1/2 A Outer Ø: 8 x 1 mm
Installation length: 450 mm
AT-450
Stainless steel immersion sleeve Nominal pressure: PN 40 bar, material: 1.4571.
Screw-in thread: G 1/2 A Outer Ø: 9 mm
Installation length: 450 mm
Screw-in thread: G 1/2 A Outer Ø: 9 mm
Installation length: 450 mm
Einblicke zu 40 Jahren Oppermann
Contact us