STB-01
Art. no. 104217
Safety temperature limiter 1 m capillary, manual reset
For the use in heat generator systems and other
heating, ventilation and air conditioning
applications. Certified to EN 14597.
Intrinsically safe design. Setting range: 90 –
110 °C Housing: 70 x 110 x 70 mm (W x H x D),
protection class: IP 66, changeover contact with
screw connections, cable gland M 20, Delivery
without immersion sleeve and mounting material.
Data sheet no. 20680
For the use in heat generator systems and other
heating, ventilation and air conditioning
applications. Certified to EN 14597.
Intrinsically safe design. Setting range: 90 –
110 °C Housing: 70 x 110 x 70 mm (W x H x D),
protection class: IP 66, changeover contact with
screw connections, cable gland M 20, Delivery
without immersion sleeve and mounting material.
Data sheet no. 20680
Unit price
€69.50
Safety temperature limiter 1 m capillary, manual reset
For the use in heat generator systems and other
heating, ventilation and air conditioning
applications. Certified to EN 14597.
Intrinsically safe design. Setting range: 90 –
110 °C Housing: 70 x 110 x 70 mm (W x H x D),
protection class: IP 66, changeover contact with
screw connections, cable gland M 20, Delivery
without immersion sleeve and mounting material.
Data sheet no. 20680
For the use in heat generator systems and other
heating, ventilation and air conditioning
applications. Certified to EN 14597.
Intrinsically safe design. Setting range: 90 –
110 °C Housing: 70 x 110 x 70 mm (W x H x D),
protection class: IP 66, changeover contact with
screw connections, cable gland M 20, Delivery
without immersion sleeve and mounting material.
Data sheet no. 20680
| Measured medium 1: |
Surfaces |
|---|---|
| Measuring range 1: |
+90…+110 °C |
| Outputs 1: |
Switching output |
| Permissible temperature of medium 1: |
+130 °C |
| Protection type: |
IP66 |
| Sensor element 1: |
Steam-filled capillary tube |
Datasheet 20680 - Safety Temperature Limiter – STB-01 Temperature Monitor – TW-01
Catalogue 2024 (PDF)
Catalogue price list 2024 (Excel)
Catalogue price list 2024 (PDF)
Flip catalogue 2024
Technical data
| Measured medium 1: |
Surfaces |
|---|---|
| Measuring range 1: |
+90…+110 °C |
| Outputs 1: |
Switching output |
| Permissible temperature of medium 1: |
+130 °C |
| Protection type: |
IP66 |
| Sensor element 1: |
Steam-filled capillary tube |
Downloads
Datasheet 20680 - Safety Temperature Limiter – STB-01 Temperature Monitor – TW-01
Catalogue 2024 (PDF)
Catalogue price list 2024 (Excel)
Catalogue price list 2024 (PDF)
Flip catalogue 2024
TH-MS-10-100
Brass immersion sleeve Nominal pressure: PN 10 bar.
""Screw-in thread: R 1/2"". External Ø: 9 x 1 mm.
Installation length: 100 mm."
""Screw-in thread: R 1/2"". External Ø: 9 x 1 mm.
Installation length: 100 mm."
TH-MS-10-150
Brass immersion sleeve Nominal pressure: PN 10 bar.
""Screw-in thread: R 1/2"". External Ø: 9 x 1 mm.
Installation length: 150 mm."
""Screw-in thread: R 1/2"". External Ø: 9 x 1 mm.
Installation length: 150 mm."
TH-MS-10-200
Brass immersion sleeve Nominal pressure: PN 10 bar.
""Screw-in thread: R 1/2"". External Ø: 9 x 1 mm.
Installation length: 200 mm."
""Screw-in thread: R 1/2"". External Ø: 9 x 1 mm.
Installation length: 200 mm."
TH-MS-10-280
Brass immersion sleeve Nominal pressure: PN 10 bar.
""Screw-in thread: R 1/2"". External Ø: 9 x 1 mm.
Installation length: 280 mm."
""Screw-in thread: R 1/2"". External Ø: 9 x 1 mm.
Installation length: 280 mm."
TH-MS-10-450
Brass immersion sleeve Nominal pressure: PN 10 bar.
""Screw-in thread: R 1/2"". External Ø: 9 x 1 mm.
Installation length: 450 mm."
""Screw-in thread: R 1/2"". External Ø: 9 x 1 mm.
Installation length: 450 mm."
TH-MS-10-600
Brass immersion sleeve Nominal pressure: PN 10 bar.
""Screw-in thread: R 1/2"". External Ø: 9 x 1 mm.
Installation length: 600 mm."
""Screw-in thread: R 1/2"". External Ø: 9 x 1 mm.
Installation length: 600 mm."
TH-V4A-40-100
Stainless steel immersion sleeve Nominal pressure: PN 40 bar.
""Screw-in thread: G 1/2"". External Ø: 9 mm.
Installation length: 100 mm."
""Screw-in thread: G 1/2"". External Ø: 9 mm.
Installation length: 100 mm."
TH-V4A-40-150
Stainless steel immersion sleeve Nominal pressure: PN 40 bar.
""Screw-in thread: G 1/2"". External Ø: 9 mm.
Installation length: 150 mm."
""Screw-in thread: G 1/2"". External Ø: 9 mm.
Installation length: 150 mm."
TH-V4A-40-200
Stainless steel immersion sleeve Nominal pressure: PN 40 bar.
""Screw-in thread: G 1/2"". External Ø: 9 mm.
Installation length: 200 mm."
""Screw-in thread: G 1/2"". External Ø: 9 mm.
Installation length: 200 mm."
TH-V4A-40-280
Stainless steel immersion sleeve Nominal pressure: PN 40 bar.
""Screw-in thread: G 1/2"". External Ø: 9 mm.
Installation length: 280 mm."
""Screw-in thread: G 1/2"". External Ø: 9 mm.
Installation length: 280 mm."
TH-V4A-40-450
Stainless steel immersion sleeve Nominal pressure: PN 40 bar.
""Screw-in thread: G 1/2"". External Ø: 9 mm.
Installation length: 450 mm."
""Screw-in thread: G 1/2"". External Ø: 9 mm.
Installation length: 450 mm."
TH-V4A-40-600
Stainless steel immersion sleeve Nominal pressure: PN 40 bar.
""Screw-in thread: G 1/2"". External Ø: 9 mm.
Installation length: 600 mm."
""Screw-in thread: G 1/2"". External Ø: 9 mm.
Installation length: 600 mm."
HK
Retaining clip Retaining clip for immersion sleeves.
Prevents the capillary sensor from slipping out of
the immersion sleeve.
Prevents the capillary sensor from slipping out of
the immersion sleeve.
SB-02
Tensioning belt Tensioning belt for pipe mounting of the SBT-01 or TW-01.
""Length: 330 mm. Permissible pipe diameters: 1/2""
to 3"""
""Length: 330 mm. Permissible pipe diameters: 1/2""
to 3"""
SWH
Support spiral holder Support spiral holder for duct mounting.
For positioning the capillary sensor in the air
duct. Length of the support spiral max. 200 mm.
For positioning the capillary sensor in the air
duct. Length of the support spiral max. 200 mm.
WBB
Wall installation bracket Installation bracket for wall mounting.
The bracket is needed if the capillary line cannot
be run through the recess in the housing base and
if spacing to the mounting surface is needed.
The bracket is needed if the capillary line cannot
be run through the recess in the housing base and
if spacing to the mounting surface is needed.
Einblicke zu 40 Jahren Oppermann
Contact us