PV-MOD-AD4
Art. no. 103938
Differential pressure vol. transm. air, 0 – 4,000 Pa Output Modbus
For measuring the differential pressure of air and
non-aggressive gases. 10x offset adjustable via
rotary switch. Tolerance: +/- 1% of final value
(4 kPa) at -5 – 65 °C. Burst pressure 40 kPa.
With captive lid. 8 lid positions selectable.
Volumetric flow calculation, 5P calibration and
settings possible via optional display. Output
signal linear due to microprocessor technology.
Power supply: 15 – 30 V AC/DC. Power consumption:
85 mA (24 V AC)/25 mA (24 V DC). Downstream
connection: 2 4 mm nipple. Housing: Base: PBT,
color similar to RAL 7016. Lid: PC, color similar
to RAL 7016. Ring: PBT, color similar to RAL
1003. 2 x Strain relief M16. Protection class: IP
65, (including seal ring). Fast wiring with
double-row spring terminals. Cable cross-section
0.2 – 1.5 mm². Permissible ambient conditions:
-20 °C to 70°C. 0 – 95% rH (non-condensing).
Leakage resistance: 100 MΩ, 20°C, 500 V DC.
Data sheet no. 13301
For measuring the differential pressure of air and
non-aggressive gases. 10x offset adjustable via
rotary switch. Tolerance: +/- 1% of final value
(4 kPa) at -5 – 65 °C. Burst pressure 40 kPa.
With captive lid. 8 lid positions selectable.
Volumetric flow calculation, 5P calibration and
settings possible via optional display. Output
signal linear due to microprocessor technology.
Power supply: 15 – 30 V AC/DC. Power consumption:
85 mA (24 V AC)/25 mA (24 V DC). Downstream
connection: 2 4 mm nipple. Housing: Base: PBT,
color similar to RAL 7016. Lid: PC, color similar
to RAL 7016. Ring: PBT, color similar to RAL
1003. 2 x Strain relief M16. Protection class: IP
65, (including seal ring). Fast wiring with
double-row spring terminals. Cable cross-section
0.2 – 1.5 mm². Permissible ambient conditions:
-20 °C to 70°C. 0 – 95% rH (non-condensing).
Leakage resistance: 100 MΩ, 20°C, 500 V DC.
Data sheet no. 13301
Unit price
€228.40
Differential pressure vol. transm. air, 0 – 4,000 Pa Output Modbus
For measuring the differential pressure of air and
non-aggressive gases. 10x offset adjustable via
rotary switch. Tolerance: +/- 1% of final value
(4 kPa) at -5 – 65 °C. Burst pressure 40 kPa.
With captive lid. 8 lid positions selectable.
Volumetric flow calculation, 5P calibration and
settings possible via optional display. Output
signal linear due to microprocessor technology.
Power supply: 15 – 30 V AC/DC. Power consumption:
85 mA (24 V AC)/25 mA (24 V DC). Downstream
connection: 2 4 mm nipple. Housing: Base: PBT,
color similar to RAL 7016. Lid: PC, color similar
to RAL 7016. Ring: PBT, color similar to RAL
1003. 2 x Strain relief M16. Protection class: IP
65, (including seal ring). Fast wiring with
double-row spring terminals. Cable cross-section
0.2 – 1.5 mm². Permissible ambient conditions:
-20 °C to 70°C. 0 – 95% rH (non-condensing).
Leakage resistance: 100 MΩ, 20°C, 500 V DC.
Data sheet no. 13301
For measuring the differential pressure of air and
non-aggressive gases. 10x offset adjustable via
rotary switch. Tolerance: +/- 1% of final value
(4 kPa) at -5 – 65 °C. Burst pressure 40 kPa.
With captive lid. 8 lid positions selectable.
Volumetric flow calculation, 5P calibration and
settings possible via optional display. Output
signal linear due to microprocessor technology.
Power supply: 15 – 30 V AC/DC. Power consumption:
85 mA (24 V AC)/25 mA (24 V DC). Downstream
connection: 2 4 mm nipple. Housing: Base: PBT,
color similar to RAL 7016. Lid: PC, color similar
to RAL 7016. Ring: PBT, color similar to RAL
1003. 2 x Strain relief M16. Protection class: IP
65, (including seal ring). Fast wiring with
double-row spring terminals. Cable cross-section
0.2 – 1.5 mm². Permissible ambient conditions:
-20 °C to 70°C. 0 – 95% rH (non-condensing).
Leakage resistance: 100 MΩ, 20°C, 500 V DC.
Data sheet no. 13301
| Measured medium 1: |
Air |
|---|---|
| Permissible temperature of medium 1: |
-5…+65 °C |
| Power supply 1: |
24 V AC/DC |
| Protection type: |
IP65 |
| Sensor element 1: |
MEMS sensor |
Datasheet 13301 - OPP-SENS® Differential Volume Flow Transmitter / Air PV-...
Flyer OPP-SENS® NFC
Catalogue 2024 (PDF)
Catalogue price list 2024 (Excel)
Catalogue price list 2024 (PDF)
Flip catalogue 2024
EG-Konformität_OPP-SENS_2016-04-20 (only German)
Technical data
| Measured medium 1: |
Air |
|---|---|
| Permissible temperature of medium 1: |
-5…+65 °C |
| Power supply 1: |
24 V AC/DC |
| Protection type: |
IP65 |
| Sensor element 1: |
MEMS sensor |
Downloads
Datasheet 13301 - OPP-SENS® Differential Volume Flow Transmitter / Air PV-...
Flyer OPP-SENS® NFC
Catalogue 2024 (PDF)
Catalogue price list 2024 (Excel)
Catalogue price list 2024 (PDF)
Flip catalogue 2024
EG-Konformität_OPP-SENS_2016-04-20 (only German)
WITTERUNGSSCHUTZ
Weather protection for outside temperature sensor
Material: Stainless steel V2A Cut: 210 mm Width:
120 mm with 3 drill holes, 6 mm each
Material: Stainless steel V2A Cut: 210 mm Width:
120 mm with 3 drill holes, 6 mm each
D - Display OPP-SENS
Display & control unit can be illuminated. With autoadapt and capacitive buttons.
Fits all round sensor connection heads with active
outputs. The unit is fitted with ribbon cable and
a reverse polarity-protected connector on the
electronics board and is ready for use without
configuration (autoadapt). The corresponding menu
for the transmitter is automatically displayed.
The unit is illuminated (only with 3-wire
connection) and has capacitive buttons. The
lighting duration, contrast and temperature
settings can be adjusted via the menu. With bus
transmitters, all parameters such as bus
addresses, baud rate, etc. can be configured
directly. The 5-point calibration is also
performed via this unit. IP 65 protection due to
the integrated seal. For configuration and
calibration: Multiple sensors can be configured
successively using one unit and then closed and
operated with the normal cover. Used as actual
value display: The display permanently replaces
the cover. Data sheet: 20902
Fits all round sensor connection heads with active
outputs. The unit is fitted with ribbon cable and
a reverse polarity-protected connector on the
electronics board and is ready for use without
configuration (autoadapt). The corresponding menu
for the transmitter is automatically displayed.
The unit is illuminated (only with 3-wire
connection) and has capacitive buttons. The
lighting duration, contrast and temperature
settings can be adjusted via the menu. With bus
transmitters, all parameters such as bus
addresses, baud rate, etc. can be configured
directly. The 5-point calibration is also
performed via this unit. IP 65 protection due to
the integrated seal. For configuration and
calibration: Multiple sensors can be configured
successively using one unit and then closed and
operated with the normal cover. Used as actual
value display: The display permanently replaces
the cover. Data sheet: 20902
D-NFC - Display OPP-SENS
Display & control unit. With NFC interface and capacitive button.
Fits all round sensor connection heads with active
outputs. The unit is fitted with ribbon cable and
a reverse polarity-protected connector on the
electronics board and is ready for use without
configuration (autoadapt). The corresponding
measuring values for the respective transmitter
are automatically displayed. The unit has a
capacitive push button. The display has an NFC
interface. With bus transmitters, all parameters
such as bus addresses, baud rate, etc. can be
configured directly. The 5-point calibration is
also performed via this unit. IP 65 protection
due to the integrated seal. For configuration and
calibration: Multiple sensors can be configured
successively using one unit and then closed and
operated with the normal cover. Used as actual
value display: The display permanently replaces
the cover. Data sheet: 20902
Fits all round sensor connection heads with active
outputs. The unit is fitted with ribbon cable and
a reverse polarity-protected connector on the
electronics board and is ready for use without
configuration (autoadapt). The corresponding
measuring values for the respective transmitter
are automatically displayed. The unit has a
capacitive push button. The display has an NFC
interface. With bus transmitters, all parameters
such as bus addresses, baud rate, etc. can be
configured directly. The 5-point calibration is
also performed via this unit. IP 65 protection
due to the integrated seal. For configuration and
calibration: Multiple sensors can be configured
successively using one unit and then closed and
operated with the normal cover. Used as actual
value display: The display permanently replaces
the cover. Data sheet: 20902
Klimaset gewinkelt Typ 6550
Metal air-conditioning kit consisting of: 2 duct connection nipples type 6552,
2 rubber bushings type 6553 and 2 m PVC hose 6 mm
Ø
Data sheet no. 13101
2 rubber bushings type 6553 and 2 m PVC hose 6 mm
Ø
Data sheet no. 13101
Einblicke zu 40 Jahren Oppermann
Contact us