MS3-TV-I-80-DO-D-NFC
Art. no. 105619
Multisensor CO2, temperature and humidity, relay module with display and NFC interface
For installation in air duct.
CO2 measurement range: 0 - 5,000 ppm,
temperature measurement range: -10 - 50 °C,
humidity measurement range: 0 - 95 %rh.
CO2 tolerance: +/- 35 ppm +/-3% of measured value.
temperature tolerance: +/- 1K.
humidity tolerance: +/- 2% at 25°C and 10-90% rh.
Air flows through the air duct sensor tube past
the sensor and back into the air duct.
The measurement principle is based on nondispersive infrared
technology with automatic self-calibration.
maintenance-free. with captive rotary lid.
8 selectable lid positions.
parametrization via NFC interface in display.
3 configurable analog outputs 1 - 10 V DC.
1 relay output - 1 x C/NO/NC for two-level controller, configurable.
.
parity: none, odd, even, address range 1 - 127 adjustable via NFC tool.
power supply:19 - 26 V AC/DC,
current draw: DC 38 mA, AC 61 mA.
housing: base: PBT, color similar to RAL 7016.
lid: PC, color similar to RAL 7016.
Ring: PBT, color similar to RAL 1003.
protection type: IP 20 sensor housing, IP65 OPP-SENS housing.
strain relief: 2 x M16 und 2 x M12.
fast wiring thanks to removable spring terminals.
cable cross-section 0.2-1.5 mm².
terminal resistor via DIP switch.
minimum flow velocity 1m/s.
permissible ambient conditions: - 10°C to 50°C.
0 – 95 %rh (non-condensing).
Data Sheet No. 14140
For installation in air duct.
CO2 measurement range: 0 - 5,000 ppm,
temperature measurement range: -10 - 50 °C,
humidity measurement range: 0 - 95 %rh.
CO2 tolerance: +/- 35 ppm +/-3% of measured value.
temperature tolerance: +/- 1K.
humidity tolerance: +/- 2% at 25°C and 10-90% rh.
Air flows through the air duct sensor tube past
the sensor and back into the air duct.
The measurement principle is based on nondispersive infrared
technology with automatic self-calibration.
maintenance-free. with captive rotary lid.
8 selectable lid positions.
parametrization via NFC interface in display.
3 configurable analog outputs 1 - 10 V DC.
1 relay output - 1 x C/NO/NC for two-level controller, configurable.
.
parity: none, odd, even, address range 1 - 127 adjustable via NFC tool.
power supply:19 - 26 V AC/DC,
current draw: DC 38 mA, AC 61 mA.
housing: base: PBT, color similar to RAL 7016.
lid: PC, color similar to RAL 7016.
Ring: PBT, color similar to RAL 1003.
protection type: IP 20 sensor housing, IP65 OPP-SENS housing.
strain relief: 2 x M16 und 2 x M12.
fast wiring thanks to removable spring terminals.
cable cross-section 0.2-1.5 mm².
terminal resistor via DIP switch.
minimum flow velocity 1m/s.
permissible ambient conditions: - 10°C to 50°C.
0 – 95 %rh (non-condensing).
Data Sheet No. 14140
Unit price
€399.50
Multisensor CO2, temperature and humidity, relay module with display and NFC interface
For installation in air duct.
CO2 measurement range: 0 - 5,000 ppm,
temperature measurement range: -10 - 50 °C,
humidity measurement range: 0 - 95 %rh.
CO2 tolerance: +/- 35 ppm +/-3% of measured value.
temperature tolerance: +/- 1K.
humidity tolerance: +/- 2% at 25°C and 10-90% rh.
Air flows through the air duct sensor tube past
the sensor and back into the air duct.
The measurement principle is based on nondispersive infrared
technology with automatic self-calibration.
maintenance-free. with captive rotary lid.
8 selectable lid positions.
parametrization via NFC interface in display.
3 configurable analog outputs 1 - 10 V DC.
1 relay output - 1 x C/NO/NC for two-level controller, configurable.
.
parity: none, odd, even, address range 1 - 127 adjustable via NFC tool.
power supply:19 - 26 V AC/DC,
current draw: DC 38 mA, AC 61 mA.
housing: base: PBT, color similar to RAL 7016.
lid: PC, color similar to RAL 7016.
Ring: PBT, color similar to RAL 1003.
protection type: IP 20 sensor housing, IP65 OPP-SENS housing.
strain relief: 2 x M16 und 2 x M12.
fast wiring thanks to removable spring terminals.
cable cross-section 0.2-1.5 mm².
terminal resistor via DIP switch.
minimum flow velocity 1m/s.
permissible ambient conditions: - 10°C to 50°C.
0 – 95 %rh (non-condensing).
Data Sheet No. 14140
For installation in air duct.
CO2 measurement range: 0 - 5,000 ppm,
temperature measurement range: -10 - 50 °C,
humidity measurement range: 0 - 95 %rh.
CO2 tolerance: +/- 35 ppm +/-3% of measured value.
temperature tolerance: +/- 1K.
humidity tolerance: +/- 2% at 25°C and 10-90% rh.
Air flows through the air duct sensor tube past
the sensor and back into the air duct.
The measurement principle is based on nondispersive infrared
technology with automatic self-calibration.
maintenance-free. with captive rotary lid.
8 selectable lid positions.
parametrization via NFC interface in display.
3 configurable analog outputs 1 - 10 V DC.
1 relay output - 1 x C/NO/NC for two-level controller, configurable.
.
parity: none, odd, even, address range 1 - 127 adjustable via NFC tool.
power supply:19 - 26 V AC/DC,
current draw: DC 38 mA, AC 61 mA.
housing: base: PBT, color similar to RAL 7016.
lid: PC, color similar to RAL 7016.
Ring: PBT, color similar to RAL 1003.
protection type: IP 20 sensor housing, IP65 OPP-SENS housing.
strain relief: 2 x M16 und 2 x M12.
fast wiring thanks to removable spring terminals.
cable cross-section 0.2-1.5 mm².
terminal resistor via DIP switch.
minimum flow velocity 1m/s.
permissible ambient conditions: - 10°C to 50°C.
0 – 95 %rh (non-condensing).
Data Sheet No. 14140
| Interface 1: |
NFC |
|---|---|
| Measured medium 1: |
Air |
| Measuring range 1: |
0...5000 ppm |
| Measuring range 2: |
-10...+50 °C |
| Measuring range 3: |
0...95 % rh |
| Outputs 1: |
Measurement signal 1...10 V |
| Permissible temperature of medium 1: |
-10…+50 °C |
| Power supply 1: |
24 V AC/DC |
| Protection type: |
IP20 |
| Sensor element 1: |
NDIR sensor |
| Sensor element 2: |
Digital humidity and temperature sensor |
| Sensor length: |
80 mm |
Datasheet 14140 - OPP-SENS® Multi-Sensor MS/Multi-Controller MC
Flyer OPP-SENS® NFC
Catalogue 2024 (PDF)
Catalogue price list 2024 (Excel)
Catalogue price list 2024 (PDF)
Flip catalogue 2024
EG-Konformität_OPP-SENS_2016-04-20 (only German)
OPP-SENS operating instructions Multisensor/Multiregler
Technical data
| Interface 1: |
NFC |
|---|---|
| Measured medium 1: |
Air |
| Measuring range 1: |
0...5000 ppm |
| Measuring range 2: |
-10...+50 °C |
| Measuring range 3: |
0...95 % rh |
| Outputs 1: |
Measurement signal 1...10 V |
| Permissible temperature of medium 1: |
-10…+50 °C |
| Power supply 1: |
24 V AC/DC |
| Protection type: |
IP20 |
| Sensor element 1: |
NDIR sensor |
| Sensor element 2: |
Digital humidity and temperature sensor |
| Sensor length: |
80 mm |
Downloads
Datasheet 14140 - OPP-SENS® Multi-Sensor MS/Multi-Controller MC
Flyer OPP-SENS® NFC
Catalogue 2024 (PDF)
Catalogue price list 2024 (Excel)
Catalogue price list 2024 (PDF)
Flip catalogue 2024
EG-Konformität_OPP-SENS_2016-04-20 (only German)
OPP-SENS operating instructions Multisensor/Multiregler
D-NFC - Display OPP-SENS
Display & control unit. With NFC interface and capacitive button.
Fits all round sensor connection heads with active
outputs. The unit is fitted with ribbon cable and
a reverse polarity-protected connector on the
electronics board and is ready for use without
configuration (autoadapt). The corresponding
measuring values for the respective transmitter
are automatically displayed. The unit has a
capacitive push button. The display has an NFC
interface. With bus transmitters, all parameters
such as bus addresses, baud rate, etc. can be
configured directly. The 5-point calibration is
also performed via this unit. IP 65 protection
due to the integrated seal. For configuration and
calibration: Multiple sensors can be configured
successively using one unit and then closed and
operated with the normal cover. Used as actual
value display: The display permanently replaces
the cover. Data sheet: 20902
Fits all round sensor connection heads with active
outputs. The unit is fitted with ribbon cable and
a reverse polarity-protected connector on the
electronics board and is ready for use without
configuration (autoadapt). The corresponding
measuring values for the respective transmitter
are automatically displayed. The unit has a
capacitive push button. The display has an NFC
interface. With bus transmitters, all parameters
such as bus addresses, baud rate, etc. can be
configured directly. The 5-point calibration is
also performed via this unit. IP 65 protection
due to the integrated seal. For configuration and
calibration: Multiple sensors can be configured
successively using one unit and then closed and
operated with the normal cover. Used as actual
value display: The display permanently replaces
the cover. Data sheet: 20902
Einblicke zu 40 Jahren Oppermann
Contact us