H-T-I-150
Art. no. 104099
Duct humidity sensor 1 outputs 0 – 10 V, 4 – 20 mA switchable
""For measurement of relative humidity in
ventilation ducts. Measuring range, humidity: 0 –
100% rH. Tolerance humidity: +/- 3% rH at 25 °C
and 20 – 80% rH Offsets adjustable via rotary
switch, with captive rotating lid. 8 lid
positions selectable. 5-point calibration
possible via optional display output signal linear due to
microprocessor technology. Supply voltage: 15 –
30 V AC/DC. Power consumption: 25 mA (24 V AC)/10
mA (24 V DC). Sensor diameter: 6 mm (stainless
steel). Housing: Base: PBT, color similar to RAL
7016. Lid: PC, color similar to RAL 7016. Ring:
PBT, color similar to RAL 1003. Protection class:
IP 65, (including seal ring). Strain relief M16.
Fast wiring with spring terminals 0.2 – 1.5 mm².
Permissible ambient conditions: -20 °C to +70 °C.
0 – 95% rH (non-condensing). Leakage resistance:
=> 100 MΩ, 20 °C, 500 V DC.
Data sheet no. 20901"
""For measurement of relative humidity in
ventilation ducts. Measuring range, humidity: 0 –
100% rH. Tolerance humidity: +/- 3% rH at 25 °C
and 20 – 80% rH Offsets adjustable via rotary
switch, with captive rotating lid. 8 lid
positions selectable. 5-point calibration
possible via optional display output signal linear due to
microprocessor technology. Supply voltage: 15 –
30 V AC/DC. Power consumption: 25 mA (24 V AC)/10
mA (24 V DC). Sensor diameter: 6 mm (stainless
steel). Housing: Base: PBT, color similar to RAL
7016. Lid: PC, color similar to RAL 7016. Ring:
PBT, color similar to RAL 1003. Protection class:
IP 65, (including seal ring). Strain relief M16.
Fast wiring with spring terminals 0.2 – 1.5 mm².
Permissible ambient conditions: -20 °C to +70 °C.
0 – 95% rH (non-condensing). Leakage resistance:
=> 100 MΩ, 20 °C, 500 V DC.
Data sheet no. 20901"
Unit price
€182.10
Duct humidity sensor 1 outputs 0 – 10 V, 4 – 20 mA switchable
""For measurement of relative humidity in
ventilation ducts. Measuring range, humidity: 0 –
100% rH. Tolerance humidity: +/- 3% rH at 25 °C
and 20 – 80% rH Offsets adjustable via rotary
switch, with captive rotating lid. 8 lid
positions selectable. 5-point calibration
possible via optional display output signal linear due to
microprocessor technology. Supply voltage: 15 –
30 V AC/DC. Power consumption: 25 mA (24 V AC)/10
mA (24 V DC). Sensor diameter: 6 mm (stainless
steel). Housing: Base: PBT, color similar to RAL
7016. Lid: PC, color similar to RAL 7016. Ring:
PBT, color similar to RAL 1003. Protection class:
IP 65, (including seal ring). Strain relief M16.
Fast wiring with spring terminals 0.2 – 1.5 mm².
Permissible ambient conditions: -20 °C to +70 °C.
0 – 95% rH (non-condensing). Leakage resistance:
=> 100 MΩ, 20 °C, 500 V DC.
Data sheet no. 20901"
""For measurement of relative humidity in
ventilation ducts. Measuring range, humidity: 0 –
100% rH. Tolerance humidity: +/- 3% rH at 25 °C
and 20 – 80% rH Offsets adjustable via rotary
switch, with captive rotating lid. 8 lid
positions selectable. 5-point calibration
possible via optional display output signal linear due to
microprocessor technology. Supply voltage: 15 –
30 V AC/DC. Power consumption: 25 mA (24 V AC)/10
mA (24 V DC). Sensor diameter: 6 mm (stainless
steel). Housing: Base: PBT, color similar to RAL
7016. Lid: PC, color similar to RAL 7016. Ring:
PBT, color similar to RAL 1003. Protection class:
IP 65, (including seal ring). Strain relief M16.
Fast wiring with spring terminals 0.2 – 1.5 mm².
Permissible ambient conditions: -20 °C to +70 °C.
0 – 95% rH (non-condensing). Leakage resistance:
=> 100 MΩ, 20 °C, 500 V DC.
Data sheet no. 20901"
| Measured medium 1: |
Air |
|---|---|
| Measuring range 1: |
0...100 %rh |
| Outputs 1: |
Measurement signal 0... 10 V / 4...20 mA (switchable) |
| Permissible temperature of medium 1: |
-40...+100 °C |
| Power supply 1: |
24 V AC/DC |
| Protection type: |
IP65 |
| Sensor element 1: |
Digital humidity sensor |
Datasheet 20916 - OPP-SENS® Humidity sensor H-... (relative humidity)
Flyer OPP-SENS® NFC
Catalogue 2024 (PDF)
Catalogue price list 2024 (Excel)
Catalogue price list 2024 (PDF)
Flip catalogue 2024
Technical data
| Measured medium 1: |
Air |
|---|---|
| Measuring range 1: |
0...100 %rh |
| Outputs 1: |
Measurement signal 0... 10 V / 4...20 mA (switchable) |
| Permissible temperature of medium 1: |
-40...+100 °C |
| Power supply 1: |
24 V AC/DC |
| Protection type: |
IP65 |
| Sensor element 1: |
Digital humidity sensor |
Downloads
Datasheet 20916 - OPP-SENS® Humidity sensor H-... (relative humidity)
Flyer OPP-SENS® NFC
Catalogue 2024 (PDF)
Catalogue price list 2024 (Excel)
Catalogue price list 2024 (PDF)
Flip catalogue 2024
D-NFC - Display OPP-SENS
Display & control unit. With NFC interface and capacitive button.
Fits all round sensor connection heads with active
outputs. The unit is fitted with ribbon cable and
a reverse polarity-protected connector on the
electronics board and is ready for use without
configuration (autoadapt). The corresponding
measuring values for the respective transmitter
are automatically displayed. The unit has a
capacitive push button. The display has an NFC
interface. With bus transmitters, all parameters
such as bus addresses, baud rate, etc. can be
configured directly. The 5-point calibration is
also performed via this unit. IP 65 protection
due to the integrated seal. For configuration and
calibration: Multiple sensors can be configured
successively using one unit and then closed and
operated with the normal cover. Used as actual
value display: The display permanently replaces
the cover. Data sheet: 20902
Fits all round sensor connection heads with active
outputs. The unit is fitted with ribbon cable and
a reverse polarity-protected connector on the
electronics board and is ready for use without
configuration (autoadapt). The corresponding
measuring values for the respective transmitter
are automatically displayed. The unit has a
capacitive push button. The display has an NFC
interface. With bus transmitters, all parameters
such as bus addresses, baud rate, etc. can be
configured directly. The 5-point calibration is
also performed via this unit. IP 65 protection
due to the integrated seal. For configuration and
calibration: Multiple sensors can be configured
successively using one unit and then closed and
operated with the normal cover. Used as actual
value display: The display permanently replaces
the cover. Data sheet: 20902
D - Display OPP-SENS
Display & control unit can be illuminated. With autoadapt and capacitive buttons.
Fits all round sensor connection heads with active
outputs. The unit is fitted with ribbon cable and
a reverse polarity-protected connector on the
electronics board and is ready for use without
configuration (autoadapt). The corresponding menu
for the transmitter is automatically displayed.
The unit is illuminated (only with 3-wire
connection) and has capacitive buttons. The
lighting duration, contrast and temperature
settings can be adjusted via the menu. With bus
transmitters, all parameters such as bus
addresses, baud rate, etc. can be configured
directly. The 5-point calibration is also
performed via this unit. IP 65 protection due to
the integrated seal. For configuration and
calibration: Multiple sensors can be configured
successively using one unit and then closed and
operated with the normal cover. Used as actual
value display: The display permanently replaces
the cover. Data sheet: 20902
Fits all round sensor connection heads with active
outputs. The unit is fitted with ribbon cable and
a reverse polarity-protected connector on the
electronics board and is ready for use without
configuration (autoadapt). The corresponding menu
for the transmitter is automatically displayed.
The unit is illuminated (only with 3-wire
connection) and has capacitive buttons. The
lighting duration, contrast and temperature
settings can be adjusted via the menu. With bus
transmitters, all parameters such as bus
addresses, baud rate, etc. can be configured
directly. The 5-point calibration is also
performed via this unit. IP 65 protection due to
the integrated seal. For configuration and
calibration: Multiple sensors can be configured
successively using one unit and then closed and
operated with the normal cover. Used as actual
value display: The display permanently replaces
the cover. Data sheet: 20902
HT-SF2
Plastic sintered filter (without spacer)
Protects sensors against pollution. Thread fits on
all OPP-SENS humidity sensors.
Data sheet no. 20909
Protects sensors against pollution. Thread fits on
all OPP-SENS humidity sensors.
Data sheet no. 20909
Einblicke zu 40 Jahren Oppermann
Contact us