Sensors
Discover the world of our innovative sensors, from build-in sensors / HVAC sensors of the OPP-SENS® and SENSO-X® ranges to intelligent room sensors of the OPP-ROOM® range.
FT-MOD-I-200-D-NFC
Air flow
Air flow temperature transmitter with display and NFC interface Modbus output, L = 200 mm
For measurement of air flow and temperature in
ventilation ducts. Measuring range flow 0 – 20
m/s, temperature: 0 – 50 °C. 10x offset
adjustable via rotary switch. 8 lid positions
selectable. 5-point calibration and
parameterization (address, baud rate) via the NFC
interface on the display. Incl. adjustable
mounting flange F-10 for adjusting the immersion
depth (50 – 190 mm). Output signal linear due to
microprocessor technology. Supply voltage 15 – 30
V AC/DC. Power consumption: 205 mA (24 V AC)/70
mA (24 V DC). Sensor diameter 10 mm (stainless
steel). Housing: Base: PBT, color similar to RAL
7016. Display: PC, transparent. Ring: PBT, color
similar to RAL 1003. IP65 protection (incl. seal
ring). 2 x strain relief M16. Fast wiring with
double-row spring terminals. Cable cross-section
0.2 – 1.5 mm². Terminal resistance via DIP
switch. Leakage resistance: 100 MΩ, 20 °C, 500 V
DC. Permissible ambient conditions: -20 °C to
70°C. 0 – 95% rH (non-condensing).
Data sheet no. 11400
For measurement of air flow and temperature in
ventilation ducts. Measuring range flow 0 – 20
m/s, temperature: 0 – 50 °C. 10x offset
adjustable via rotary switch. 8 lid positions
selectable. 5-point calibration and
parameterization (address, baud rate) via the NFC
interface on the display. Incl. adjustable
mounting flange F-10 for adjusting the immersion
depth (50 – 190 mm). Output signal linear due to
microprocessor technology. Supply voltage 15 – 30
V AC/DC. Power consumption: 205 mA (24 V AC)/70
mA (24 V DC). Sensor diameter 10 mm (stainless
steel). Housing: Base: PBT, color similar to RAL
7016. Display: PC, transparent. Ring: PBT, color
similar to RAL 1003. IP65 protection (incl. seal
ring). 2 x strain relief M16. Fast wiring with
double-row spring terminals. Cable cross-section
0.2 – 1.5 mm². Terminal resistance via DIP
switch. Leakage resistance: 100 MΩ, 20 °C, 500 V
DC. Permissible ambient conditions: -20 °C to
70°C. 0 – 95% rH (non-condensing).
Data sheet no. 11400
AT-050
Temperature
Stainless steel immersion sleeve Nominal pressure: PN 40 bar, material: 1.4571.
Screw-in thread: G 1/2 A Outer Ø: 9 mm
Installation length: 50 mm
Screw-in thread: G 1/2 A Outer Ø: 9 mm
Installation length: 50 mm
ATM-050
Temperature
Brass immersion sleeve Nominal pressure: PN 16 bar.
Screw-in thread: G 1/2 A Outer Ø: 8 mm
Installation length: 50 mm
Screw-in thread: G 1/2 A Outer Ø: 8 mm
Installation length: 50 mm
Befestigungswinkel für DD/DDS,
Air pressure
Metal, L-shape, type 6401 for horizontal installation position
Material: Metal
Material: Metal
Befestigungswinkel für DD/DDS,
Air pressure
Metal, S-shape, type 6402 for vertical installation position
Material: Metal
Material: Metal
Befestigungswinkel für DD/DDS,
Air pressure
Kunststoff, L-Form, Typ 6481 aufschnappbar für horizontale Einbaulage
Befestigungswinkel für DD/DDS,
Air pressure
Kunststoff, S-Form, Typ 6482 aufschnappbar für vertikale Einbaulage
C1-BAC-R-D-P1
Temperature
Room temperature controller BACnet MS/TP, with LCD display
for controlling the air temperature in rooms. With
LCD display to show heating/cooling mode, current
temperature, setpoint, valve open/close. Two
switching outputs for therm. 24V AC PWM actuators
or 3-point “open/close” control. One switching
input (closer, potential-free contact) One input
for an external NTC10 sensor (auto detect). 3
voltage outputs 0 – 10 V DC, measuring range: 0 –
+50 °C, accuracy: ± 0.5 C/25 °C. Dead time: 0 –
3.0 °C, Proport. band: 1 – 25 °C, setpoint
potentiometer, setting range 18 – 24 °C,
configurable center point. Configurable via
built-in LCD display, BACnet bus or configuration
software. BACnet MS/TP, configurable baud rate:
9.6k/19.2k/38.4k/76.8k. Parity: None, Odd, Even.
Address range 1...63 via DIP switch or up to 247
via configuration software. Power supply: 24 V
AC/DC -10%/+15%, screw terminals 55° inclined,
for wire diameters from 0.05 to 1.5 mm². Plastic
housing (ABS), IP 20, W x H x D: 86 x 120 x 25
mm, white similar to RAL 9010, wall-mounted.
Operating temperature: 0 – +50 °C. Permissible
ambient conditions: -30 – +70 °C, 0 – 95% rH,
non-condensing.
Data sheet no. 20530
for controlling the air temperature in rooms. With
LCD display to show heating/cooling mode, current
temperature, setpoint, valve open/close. Two
switching outputs for therm. 24V AC PWM actuators
or 3-point “open/close” control. One switching
input (closer, potential-free contact) One input
for an external NTC10 sensor (auto detect). 3
voltage outputs 0 – 10 V DC, measuring range: 0 –
+50 °C, accuracy: ± 0.5 C/25 °C. Dead time: 0 –
3.0 °C, Proport. band: 1 – 25 °C, setpoint
potentiometer, setting range 18 – 24 °C,
configurable center point. Configurable via
built-in LCD display, BACnet bus or configuration
software. BACnet MS/TP, configurable baud rate:
9.6k/19.2k/38.4k/76.8k. Parity: None, Odd, Even.
Address range 1...63 via DIP switch or up to 247
via configuration software. Power supply: 24 V
AC/DC -10%/+15%, screw terminals 55° inclined,
for wire diameters from 0.05 to 1.5 mm². Plastic
housing (ABS), IP 20, W x H x D: 86 x 120 x 25
mm, white similar to RAL 9010, wall-mounted.
Operating temperature: 0 – +50 °C. Permissible
ambient conditions: -30 – +70 °C, 0 – 95% rH,
non-condensing.
Data sheet no. 20530
CAB-02
Accessoires
USB cable for OPP-Room for configuring OPP-Room transmitters.
For configuring outputs, controller settings,
display brightness, alarm thresholds (LCD display
color change ), bus settings, etc. Galvanic
isolation included. For use with the OR-C
OPP-Room configuration software (see the download
area of our website).
Data sheet no. 20560
For configuring outputs, controller settings,
display brightness, alarm thresholds (LCD display
color change ), bus settings, etc. Galvanic
isolation included. For use with the OR-C
OPP-Room configuration software (see the download
area of our website).
Data sheet no. 20560